A permit application to produce Class A or Class B biosolids must be typed or computer printed and include:

1. (1) the name, address, and telephone number of the applicant or the applicant's authorized representative;
2. (2) the name, mailing address, and telephone number of the generator or operator and the land applier, if different, and contact person from each source;
3. (3) a brief description of the biosolids including a list of the major commercial or industrial facilities that discharge to the municipal treatment system;
4. (4) a description of the use or disposal practices and locations of any sites for transfer of the biosolids for treatment, use, land application, and/or disposal;
5. (5) laboratory test results of a representative soil sample from each proposed site in the permit application. The composite soil samples must be tested, and background levels set, for the metals listed in Tables 1 and 3 of 40 CFR § 503.13(b), pH, and the nutrients - nitrogen (N), ammonia (NH₄), nitrates (NO₃), potassium (K) and phosphorus (P);
6. (6) a list of environmental state or federal permits held by the applicant; and
7. (7) if a facility, generator, and/or land application site is located in the watershed of an Outstanding Resource Water as defined in OAC 252:730, the Outstanding Resource Water shall be identified.

Added at 26 Ok Reg 1901, eff 7-1-09

Amended at 28 Ok Reg 1231, eff 7-1-11

Amended at 40 Ok Reg 241, eff 10-25-22 (emergency)

Amended at 40 Ok Reg 2018, eff 9-15-23