1. (a) Applicability. The maps and designs identified in this Part shall be submitted with permit applications for:

   1. (1) all new CCR units;
   2. (2) expansions of permit boundaries of existing CCR units;
   3. (3) lateral expansions of existing CCR units; and
   4. (4) any other modification to an existing permit where the data originally submitted would be made ambiguous, inaccurate, or out of date by the proposed modification.
2. (b) Illegible. The permit application will be considered administratively incomplete if any maps or drawings submitted are not legible.
3. (c) Map sequence. All maps and designs shall be submitted in the permit application in the sequence identified.
4. (d) Map scale. Unless otherwise identified, all maps submitted as part of a permit application shall be prepared at a scale of one inch equals one hundred feet (1" = 100'). An alternative scale may be used with approval of the DEQ.

5. (e) Map details.

   1. (1) All maps shall show as a minimum, legend, title, north arrow, permit boundary, buffer zone, and boundaries of waste disposal or processing areas.
   2. (2) If applicable, the locations of groundwater monitoring wells and gas monitoring probes shall be identified.

Added at 33 Ok Reg 1469, eff 9-15-16