(B) Within sixty days after receipt by an operator of a gas storage reservoir of a notice from the gas storage well inspector under division (A) of this section, such operator shall file on the same day with both the division of mineral resources management and the division of oil and gas resources management identical maps prepared by a registered surveyor, registered engineer, or competent geologist, which shall do all of the following:

1. (1) Indicate the stratum or strata in which such gas storage reservoir is located;
2. (2) Show the location of the boundary of the reservoir and the boundary of its protective area, and the known fixed monuments, corner stones, or other permanent markers in such boundary lines;
3. (3) Show the boundary lines of the counties, townships, and sections or lots that are within the limits of such maps, and the name of each such county and township and the number of each such section or lot clearly indicated thereon;
4. (4) Show the location of all oil or gas wells known to the operator of such reservoir that have been drilled within the boundary of the reservoir or within its protective area, and indicate which of such wells, if any, have been or are to be plugged or reconditioned for use in the operation of such reservoir. The location of the boundary of the gas storage reservoir as shown on the maps shall be defined by the location of those wells around the periphery of the reservoir that had no gas production when drilled into the storage stratum of the reservoir, provided that, if the operator of the reservoir, upon taking into consideration the number and nature of such wells, the geological and production knowledge of the storage stratum, its character, permeability, and distribution, and operating experience, determines that the location of the boundary of the reservoir should be differently defined, the reservoir operator may, on the maps, show the boundary of the reservoir to be located at a location different from the location defined by the location of those wells around the periphery of the reservoir that had no gas production when drilled into the storage stratum.

(C) Any coal mine operator who receives from the gas storage well inspector a copy of a map as provided by division (E) of this section may request the gas storage well inspector to furnish the coal mine operator with:

1. (1) The name of the original operator of any well shown on such map;
2. (2) The date drilling of such well was completed;
3. (3) The total depth of such well;
4. (4) The depth at which oil or gas was encountered in such well if it was productive of oil or gas;
5. (5) The initial rock pressure of such well;
6. (6) A copy of the log of the driller of such well or other similar data;
7. (7) The location of such well in respect to the property lines of the tract of land on which it is located;

8. (8) A statement as to whether the well is inactive or active:

   1. (a) If inactive, the date of plugging and other pertinent data;
   2. (b) If active, whether it is being used for test purposes or storage purposes.
9. (9) A statement of the maximum injection pressure contemplated by the operator of the reservoir shown on such map. Upon receipt of such a request, the gas storage well inspector shall promptly furnish the coal mine operator the information requested. If the information is not ascertainable from the files in the division of oil and gas resources management, the gas storage well inspector shall request the reservoir operator to furnish the division with such information to the extent that the reservoir operator has knowledge thereof. Upon receipt of such a request, the reservoir operator shall promptly furnish such information to the division. Thereupon the gas storage well inspector shall promptly transmit such information to the mine operator who requested it. Whenever the operator of a gas storage reservoir determines that the location of the boundary of the reservoir as shown on the most recent map thereof on file in the division pursuant to this section is incorrect, the reservoir operator shall file with the division an amended map showing the boundary of the reservoir to be located at the location that the reservoir operator then considers to be correct.