N.Y. Comp. Codes R. & Regs. tit. 9, § 459.3 – Procedure for obtaining departmental approval. | Midpage
§ 459.3
N.Y. Comp. Codes R. & Regs. tit. 9, § 459.3
Procedure for obtaining departmental approval.
Executive Department
(a) The applicant shall submit:
(1) the description and model number of the device to be approved;
(2) a copy of the manufacturer's or laboratory's test report; and
(3) a certificate certifying that the device has been tested in accordance with section 459.4 of this Part and found acceptable.
(b) Approval of snowmobile equipment or standards referred to in section 459.2 of this Part shall be granted by the commissioner on receipt of a certification from the manufacturer or laboratory currently engaged in the examination, testing and evaluation of such equipment or noise control devices, and which maintains or employs adequate staff and facilities to perform such functions. The certification and test report shall state that the equipment has been tested in accordance with the provisions of section 459.4 of this Part. The certification shall be accompanied by a full and complete test report setting forth the general conditions upon which the test was completed and the specifications regarding same. Upon receipt of a copy of the test and the certification, the commissioner, will by letter, notify the applicant that the device has been approved and that they may legally sell the snowmobiles in the State of New York.