N.Y. Comp. Codes R. & Regs. tit. 9, § 114.8 – Cannabinoid hemp product requirements.

(a) All cannabinoid hemp products distributed or offered for retail sale in New York State shall:
1. (1) be manufactured in accordance with Parts 101, 111 or 117 of Title 21 of the Code of Federal Regulations, as appropriate for the type of product being manufactured and as otherwise determined appropriate by the office in guidance or future regulation;
2. (2) contain no more than 3/10ths of a percent (0.3 percent) total Δ9-Tetrahydrocannabinol concentration. The office may through future regulation impose a total THC cap for the purpose of protecting public health, which shall include detectable levels of total Δ9-Tetrahydrocannabinol, Δ8-Tetrahydrocannabinol and Δ10-Tetrahydrocannabinol in milligrams per serving and milligrams per package for cannabinoid hemp products based on the product form, volume, number of servings, and ratio of CBD to THC;
3. (3) not contain liquor, wine, beer, cider or meet the definition of an alcoholic beverage as defined in section 3 of the Alcohol Beverage Control Law;
4. (4) not contain tobacco or nicotine in the product;
5. (5) not be in the form of an injectable, inhaler, product including cigarette, cigar or pre-roll, or any other disallowed form as determined by the office;
6. (6) accurately reflect testing results and not contain less than 80 percent or more than 120 percent of the concentration of total cannabinoid content as listed on the product label;
7. (7) comply with packaging and labeling standards in section 114.9 of this Part;
8. (8) be prepackaged and not added to food or any other consumable products at the point of sale;
9. (9) be shelf stable;
10. (10) comply with product testing standards in section 114.10 of this Part; and
11. (11) not contain synthetic cannabinoids, or cannabinoids created through isomerization, including Δ8-tetrahydrocannabinol and Δ10-tetrahydrocannabinol.
(b) If the cannabinoid hemp product is a food or beverage manufactured under Part 117 of Title 21 Code of Federal Regulations, it shall not contain more than 25 milligrams of total cannabinoids per individually packaged product. If the cannabinoid hemp product is a supplement manufactured under Part 111 of Title 21 Code of Federal Regulations, it shall not contain more than 3,000 milligram of total cannabinoids per product, with no more than 75 milligrams per individual serving.
(c) If the cannabinoid hemp product contains multiple servings which are not individually wrapped, premeasured, separated or delineated, it shall include a measuring device such as a measuring cap, cup or dropper with the product packaging. Hash marks on the package shall not qualify as a measuring device.
(d) All inhalable cannabinoid hemp products shall meet the following additional requirements:
1. (1) be a closed system with a pre-filled disposable cartridge that attaches to a rechargeable battery, or a single-use product that cannot be recharged;
2. (2) electronic vaporization devices shall have internal or external temperature controls to prevent combustion and have a heating element made of inert material such as glass, ceramic or stainless steel and not plastic or rubber;
3. (3) except for hemp-derived terpenes, excipients and ingredients must be pharmaceutical grade unless otherwise approved by the office, and shall not include:
  1. (i) synthetic terpenes;
  2. (ii) polyethylene glycol (PEG);
  3. (iii) vitamin E acetate;
  4. (iv) medium chain triglycerides (MCT oil);
  5. (v) medicinal compounds;
  6. (vi) illegal or controlled substances;
  7. (vii) artificial food coloring;
  8. (viii) benzoic acid;
  9. (ix) diketones; and
  10. (x) any other compound or ingredient as determined by the office in regulation;
4. (4) not contain any flavors or flavoring agents, except for hemp-derived terpenes; and
5. (5) include an office approved symbol, as set out in future regulation, in a manner that is clear and conspicuous.