1. (a) A waste control plan that includes:

   1. (1) a program for detecting and preventing the receipt of hazardous wastes at the facility. This program must include, but not be limited to:

      1. (i) random inspections of incoming loads;
      2. (ii) inspections of suspicious loads;
      3. (iii) records of inspections;
      4. (iv) procedures for notifying department staff if a hazardous waste is discovered in a load; and

      5. (v) procedures for proper management of discovered hazardous waste.

         (b) A radioactive waste detection plan.

         The plan must include procedures for detecting radioactive material; operation and maintenance documents for radiation detectors, including investigation alarm setpoint settings and calibration methods; and response procedures to be implemented when radioactive waste is detected as required by section 362-2.3(d) of this Subpart.

2. (c) A description of market arrangements for the final disposition of materials generated from the facility, including refuse-derived fuel or other products.

Any facility that performs post-collection separation and/or processing of municipal solid waste (MSW) to recover recyclables or to produce a refuse-derived fuel must obtain a permit from the department and must submit an application that includes the requirements identified in section 360.16 of this Title, a description of how the facility will comply with the operating requirements of section 360.19 of this Title, sections 362-2.3 and 362-2.4 of this Subpart, and the following: