N.Y. Comp. Codes R. & Regs. tit. 21, § 509.3
(a) The following definitions refer to air purifiers:
(2) Industrial air purifier means an indoor air cleaning device manufactured, advertised, marketed, labeled, and used solely for industrial use that is marketed solely through industrial supply outlets or businesses and prominently labeled as “Solely for industrial use. Potential health hazard: emits ozone.”
(b) Standard requirements for air purifiers.
Air purifiers, except industrial air purifiers, shall meet the following requirements, consistent with the standard levels from ENERGY STAR V1.2 specification for air purifiers, as incorporated by reference:
(7) for models without a Wi-Fi network connection enabled by default when shipped, partial on mode power shall not exceed one watt.
(c) Test methods.
(1) Test methods identified in Table 1 of this subdivision shall be used to determine compliance with the standards in subdivision (b) of this section. Table 1: Test Method for Air Cleaners
| ENERGY STAR Requirement | Test Method Reference |
|---|---|
| Cigarette Smoke CADR Measurement of Operating Power | ANSI/AHAM AC-1-2020: Method of Measuring the Performance of Portable Household Electric Room Air Cleaners, as incorporated by reference in section 509.61 of this Part. |
| Ozone Generation | UL 867 ED. 5.0 Electrostatic Air Cleaners. |
| Measured Partial on Mode Power (Ppartial_On) | IEC 62301 Ed. 2.0 Household electrical appliances – Measurement of standby power, as incorporated by reference in section 509.61 of this Part. |