(b) The characteristics are as follows:

1. (1) Land characteristics for all parcels with a land component:

   1. (i) ORPTS land type code or description of land use;
   2. (ii) land size;
   3. (iii) waterfront type, where appropriate;
   4. (iv) soil rating, where appropriate; and
   5. (v) influence code and percent, where appropriate.

2. (2) Site characteristics for residential and vacant parcels:

   1. (i) sewer, if not available to all parcels;
   2. (ii) water, if not available to all parcels;
   3. (iii) utilities, if not available to all parcels;
   4. (iv) site desirability;
   5. (v) neighborhood type, if used by the assessing unit;
   6. (vi) neighborhood rating, if used by the assessing unit; and
   7. (vii) zoning, if used by the assessing unit.

3. (3) Characteristics for residential buildings:

   1. (i) building style;
   2. (ii) exterior wall material;
   3. (iii) year built;
   4. (iv) number of baths, except for New York City;
   5. (v) fireplace (yes/no), except for New York City;
   6. (vi) sketch with measurements of residence;
   7. (vii) heat type, except for New York City;
   8. (viii) basement type;
   9. (ix) overall condition;
   10. (x) overall grade; and
   11. (xi) square feet of living area.

4. (4) Characteristics for commercial, industrial and utility parcels:

   1. (i) ORPTS “used as” code or description of property use;
   2. (ii) overall desirability;
   3. (iii) overall condition;
   4. (iv) overall effective year built; and
   5. (v) overall grade.

5. (5) Characteristics for commercial, industrial, and utility buildings:

   1. (i) cost model or type of frame and wall material;
   2. (ii) effective year built;
   3. (iii) construction quality;
   4. (iv) gross floor area or cubic feet;
   5. (v) number of stories or cubic feet;
   6. (vi) story height or cubic feet;
   7. (vii) basement type;
   8. (viii) basement square feet; and
   9. (ix) sketch of the commercial, industrial or utility buildings.

6. (6) Additional characteristics for rentable parcels, except apartments:

   1. (i) ORPTS “used as” code or description of the use for the rentable area;
   2. (ii) square feet of rentable area; and
   3. (iii) ORPTS unit code or unit of measurement used to supplement square footage of rentable area, e.g., bays in a service station, and number of units.

7. (7) Additional characteristics for apartment buildings:

   1. (i) ORPTS “used as” code or description of apartment;
   2. (ii) total square feet of rentable area; and
   3. (iii) total number of apartment units.

8. (8) Additional characteristics for industrial and utility parcels, other than special franchise, railroad ceiling or mass account property:

   1. (i) plot plan tied to sketch of improvements;
   2. (ii) real property equipment, e.g., compressors, generators.