N.Y. Comp. Codes R. & Regs. tit. 12, § 23-2.3
(3) Loads shall not be placed on open web steel joists until such joists are permanently located and secured including the installation of required bridging.
(b) Holing or cutting of structural steel members.
Load-bearing structural steel members shall not be materially weakened by holing, cutting or by any other means except in accordance with the advice of the designer thereof or of a professional engineer licensed to practice in the State of New York.
(c) Tag lines.
While steel panels or structural steel members are being hoisted, tag lines shall be provided and used to prevent uncontrolled movement of such panels or members.
(d) Erection of lintels.
Where exterior metal lintels are erected in steel or concrete frame buildings or other structures after the permanent floors have been installed, a suitable scaffold constructed and installed in compliance with this Part (rule) shall be provided and used unless each person engaged in the work of erecting such lintels is provided with and wears an approved safety belt or harness in compliance with this Part (rule).
(e) Tandem loads.
The suspension of tandem loads from the boom or hook of any crane or derrick over any area or location where persons work or pass is prohibited.
(a) Placing of structural members.