(a) Each municipality shall provide the municipal director with the following necessary standard weighing and measuring devices:

1. (1) Weights (class F or better).

   1. (i) Twenty 50-lb weights or 25-kg weights;
   2. (ii) One 25-lb weight or 10-kg weight;
   3. (iii) One customary weight kit with capacity of at least 20 lb (except in New York City where the capacity may be at least 8 lb); and
   4. (iv) One metric weight kit with capacity of at least 10 kg (except in New York City where the capacity may be at least 5 kg).

2. (2) Volumetric measures.

   1. (i) One large test measure with a minimum capacity of 379 L (100 gal) for inspection of petroleum dispensing meters;
   2. (ii) One graduated neck type 5-gallon test measure for inspection of petroleum dispensing pumps;
   3. (iii) One graduated neck type 5-gallon test measure for inspection of bulk milk holding tanks (if applicable); or
   4. (iv) One slicker type 5-gallon or 10-gallon test measure for inspection of bulk milk holding tanks (if applicable);
   5. (v) One set of customary glass or metal test measures with capacity from 2 fl oz to 1 gallon or 50 mL to 4 L.

3. (3) Linear measures.

   1. (i) One steel tape at least 6 feet in length;
   2. (ii) One steel tape at least 2 meters in length; or
   3. (iii) One steel tape with dual metric and customary graduations of comparable length;
   4. (iv) One yard standard—rigid type (optional);
   5. (v) One meter standard—rigid type (optional).

4. (4) Balances.

   1. (i) One portable scale, approved for use in check-weighing commodities.

5. (5) Time measure.

   1. (i) One mechanical or electronic stopwatch.