Reporting requirements shall, at a minimum, include:

1. A. quarterly reports to the director containing:

   1. (1) the maximum injection pressure;
   2. (2) a description of any event that exceeds operating parameters for annulus pressure or injection pressure as specified in the permit;
   3. (3) a description of any event which triggers an alarm or shutdown device required pursuant to Subsection F of 20.6.2.5357 NMAC and the response taken;
   4. (4) the total volume of fluid injected;
   5. (5) any change in the annular fluid volume;
   6. (6) the physical, chemical and other relevant characteristics of injected fluids; and
   7. (7) the results of monitoring prescribed under 20.6.2.5358 NMAC;

2. B. reporting, within 30 days or with the next quarterly report whichever comes later, the results of:

   1. (1) periodic tests of mechanical integrity;
   2. (2) any other test of the injection well conducted by the permittee if required by the director; and
   3. (3) any well workover.

[20.6.2.5359 NMAC - N, 8-31-15]