N.M. Code R. § 20.2.32.112 – Compliance Determination Methods

A. Unless otherwise required by 40 CFR Part 60, a facility subject to an emission limitation of 20.2.32.109 NMAC or 20.2.32.110 NMAC shall use any of the applicable reference methods specified by the US EPA at 40 CFR Part 60, Appendix A to determine compliance with the nitrogen dioxide emission limitation.
B. Compliance with the total emission limitation of 20.2.32.111 NMAC shall be based on measurements using a continuous emission monitoring system (CEMS) as required by 20.2.32.114 NMAC. Compliance determinations shall be performed using the following formula:
n
TE = ∑ E_i • H_i
i = 1
where:
TE = total station-wide nitrogen dioxide emissions (lb NO₂/day);
E_i = daily average emission rate of each unit (lb NO₂/MBTU);
H_i= daily average heat input for each unit (MBTU);
n = the number of units of coal burning equipment operated during the day.
[11/30/95; 20.2.32.112 NMAC - Rn, 20 NMAC 2.32.112 10/31/02]