Collections
New Mexico Administrative Code

Part 14

Particulate Emissions from Coal Burning Equipment

State of New Mexico

1Issuing Agency 2Scope 3Statutory Authority 4Duration 5Effective Date 6Objective 7Definitions 8Amendment and Supersession of Prior Regulations 9Documents 10ReservedRepealed 200Emission Limitations - Equipment Less Than or Equal to 250 MBTU/Hour Heat Capacity 201Emission Limitations - New Equipment Greater Than 250M BTU/Hour Heat Capacity 202Emission Limitations - Existing Equipment Greater Than 250M BTU/Hour and Less Than 5000M BTU/Hour Heat Capacity 203Emission Limitations--Existing Equipment Equal to or Greater Than 5000M BTU/Hour 204Method for Determining Emissions Limitations 205Petition for Test Method of Emission Limitation for Existing Equipment - Heat Capacity Equal to or Greater than 5000M BTU/Hour 206ReservedRepealed 300Procedure I, Introduction 301Procedure I, Method 302Sampling Train for Fine Particulate Matter, Procedure I 303Arrangement of Impaction Plates and Filter Holder in the Anderson Impactor, Procedure I 304Temperature Correction for Aerodynamic Size of Particles Captured in the Anderson Impactor, Procedure I 305Aerodynamic Diameter Vs. Flowrate Through Plate 44 of the Anderson Impactor (50% Impaction Efficiency), Procedure I 306ReservedRepealed 400Procedure II, Introduction 401Procedure II, Method 402Sampling Train for Fine Particulate Matter, Procedure II 403Arrangement of Impaction Plates and Filter in the Anderson Impactor, Procedure II 404Sample Graph of Temperature Correction for Aerodynamic Size of Particles Captured in the Anderson Impactor, Procedure II 405Sample Graph of Aerodynamic Diameter Vs. Flowrate Through Plate #4 of the Anderson Impactor (50% Impaction Efficiency), Procedure II