BLASTING: Each application shall contain a blasting plan for the proposed permit area, explaining how the applicant intends to comply with the requirements of 19.8.20.2028 through 2033 NMAC and including the following:

1. A. types and approximate amounts of explosive to be used for each type of blasting operation to be conducted;

2. B. description of procedures and plans for recording and retention of information on the following during blasting:

   (1) drilling patterns, including size, number, depths, and spacing of holes;

   (2) charge and packing of holes;

   (3) types of fuses and detonation controls; and

   (4) sequence and timing of firing holes;

3. C. description of blasting warning and site access control equipment and procedures;
4. D. description of types, capabilities, sensitivities, and locations of use of any blast monitoring equipment and procedures proposed to be used;
5. E. description of plans for recording and reporting to the director the results of preblasting surveys, if required; and

6. F. description of unavoidable hazardous conditions for which deviations from the blasting schedule will be needed under Paragraph (3) of Subsection A of 19.8.20.2030 NMAC.

   [11-29-97; 19.8.9.902 NMAC - Rn, 19 NMAC 8.2.9.902, 9-29-2000]