B. Only one-dollar and five-dollar tokens will be approved. Tokens must meet the following size and content specifications:

(1) one-dollar tokens must be disk-shaped and must measure from 1.460 through 1.470 inches in diameter and from .098 through .104 inch thick;

(2) five-dollar tokens must be disk-shaped and must measure from 1.750 inches through 1.760 inches in diameter and from .119 through .125 inch thick;

(3) tokens must not be manufactured from material possessing sufficient magnetic properties to allow them to be accepted by any coin mechanism other than that of a gaming machine; and

(4) tokens must not be manufactured from a three-layered material consisting of copper-nickel alloy clad on both sides of a pure copper core nor from a copper-based material unless the total of alloying materials is at least 20 percent of the token’s weight.

C. Tokens must meet the following inscription specifications:

(1) the name of the issuing establishment must be inscribed on each side of the token;

(2) the city in which the gaming establishment is located must be inscribed on one side of the token;

(3) the value of the token must be inscribed on each side of the token;

(4) the words “Not Legal Tender” must be inscribed on one side of the token; and

(5) a statement, approved by the board, notifying a patron that the token will be accepted to activate play only in gaming machines operated by the gaming operator licensee that issued the token, must be inscribed on one side.

[N, 12/31/98; 15.1.12.10 NMAC – Rn, 15 NMAC 1.12.10, 2/14/02]