1. (a) A street rod shall be rejected if:

   1. (1) If it does not meet the requirements set forth in Saf-C 3212.02(a) (1), (2), (6), and (7)-(22);
   2. (2) Brake pedal reserve shows that less than 1/5 of the total service brake pedal travel remains when the pedal is depressed and held, or if the pedal height cannot be maintained for 10 seconds with moderate foot force;

   3. (3) The parking brake:

      1. a. Does not hold the street rod with engine slightly accelerated in low gear; or
      2. b. The pedal or lever reaches its limit before the brakes are set;
   4. (4) Fluid is leaking from the master cylinder, calipers, wheel cylinders or, parts are missing, improperly retained or not in good working condition;
   5. (5) Hydraulic hoses, tubing or connections are leaking, chaffed, restricted, crimped, cracked, broken, corroded, flattened or insecurely fastened;
   6. (6) Any mechanical linkage parts are missing, broken or badly worn;
   7. (7) There is high friction in the brake pedal and linkage or in the brake components; or

   8. (8) On vacuum booster power brakes:

      1. a. Any hose or tube is leaking, collapsed, broken, badly chafed or improperly supported;
      2. b. Any clamp is loose, missing or broken; or
      3. c. The service brake pedal does not move slightly when the engine is started.

Source. (See Revision Notes at Chapter Heading Saf-C 3200) #8915, eff 6-22-07, EXPIRED: 6-22-15 New. #10886, INTERIM, eff 7-16-15, EXPIRES: 1-12-16; ss by #11016, eff 1-6-16