(a) A vehicle shall be rejected if:
- (1) A commercially manufactured aimer shows the headlight beam is not straight ahead and 2 degrees down; or
- (2) A headlight board shows the headlight beam is not straight ahead and less than 2 inches lower than the horizontal center line of the board, measured 25 feet from the headlamps; or
- (3) Headlight aim is unachievable due to fogging or glazing of the lens or reflector.
Source. (See Revision Notes at Chapter Heading Saf-C 3200) #8915, eff 6-22-07, EXPIRED: 6-22-15 New. #10886, INTERIM, eff 7-16-15, EXPIRES: 1-12-16; ss by #11016, eff 1-6-16