1. (a) If the VIN on the registration certificate does not match the VIN on the vehicle, the mechanic shall:

   1. (1) Make corrections to the VIN on the registration certificate of up to 3 digits or 3 letters, by drawing a slash “ / ” mark through the incorrect digit or letter and placing the correct digit or letter above or below it;
   2. (2) Complete a correction slip, form RDMV 320, and place it in a separate envelope marked “VIN corrections” to be forwarded to the department; and

   3. (3) Furnish the following on form RDMV 320:

      1. a. Plate number and type;
      2. b. Expiration date of plate;
      3. c. Owner's name, address and date of birth;
      4. d. Vehicle make, model and year;
      5. e. Incorrect VIN;
      6. f. Correct VIN;
      7. g. Mechanic’s name, signature and date signed; and
      8. h. Inspection station name and address.
2. (b) If more than 3 digits or 3 letters are incorrect on the VIN, corrections shall be made by the department. No inspection sticker shall be issued until the VIN has been corrected.
3. (c) In the event a vehicle identification number plate is missing or has been tampered with, for example, is missing pop rivets, the mechanic shall reject the vehicle and notify the department.

Source. (See Revision Notes at Chapter Heading Saf-C 3200) #8915, eff 6-22-07, EXPIRED: 6-22-15 New. #10886, INTERIM, eff 7-16-15, EXPIRES: 1-12-16; ss by #11016, eff 1-6-16; ss by #11135, eff 7-2-16