1. (a) All routine inspections shall be:

   1. (1) Scheduled as provided in Plc 403.02, unless the inspector is unable to make contact with the licensee to schedule the inspection after at least 3 attempts using the contact information on file for the licensee, in which case the inspection shall be conducted during the normal business hours of the regulated place of business; and
   2. (2) Conducted in accordance with Plc 403.

2. (b) If the inspector has contacted the licensee to arrange a date and time for the inspection and the licensee is not present at the scheduled date and time for reasons that are within the licensee’s control, or the premises are otherwise not accessible by the inspector for other than good cause as provided in Plc 403.10(b), then:

   1. (1) The premises shall be deemed to have failed the inspection; and
   2. (2) The inspector shall file a complaint against the licensee for uncooperative behavior.
3. (c) The inspector shall use the inspection checklist that has been developed for the specific profession to ensure that no items are missed and that any deficiencies identified are based on the board’s established requirements.

4. (d) If the inspector identifies a deficiency that can be corrected prior to the conclusion of the inspection, the inspector shall:

   1. (1) Allow the licensee to correct the deficiency; and
   2. (2) Note the deficiency and the correction on the inspection checklist.
5. (e) The inspector shall conduct a wrap-up meeting as specified in Plc 403.06 prior to leaving the premises, provided that if the licensee refuses to participate in the wrap-up meeting, the inspector shall note the refusal on the inspection checklist.

Source. #14031, eff 8-15-24