1. (a) The inspector shall conduct the inspection at the scheduled date and time, provided that if circumstances beyond the control of the inspector cause the inspector to not be able to conduct the inspection at the scheduled date and time, the inspector shall immediately contact the applicant to reschedule. The inspection shall be conducted within 5 working days, provided that if the applicant cannot be available due to circumstances beyond the control of the applicant, the inspection shall be scheduled as soon thereafter as is practicable.
2. (b) If the inspector arrives at the regulated place of business to be inspected at the scheduled date and time and the applicant is not present for reasons that are within the applicant’s control or the premises are otherwise not accessible by the inspector for other than good cause as provided in Plc 403.10(b), then the premises shall be deemed to have failed the inspection.
3. (c) While conducting the inspection, the inspector shall use the inspection checklist that has been developed for the specific profession to ensure that no items are missed and that any deficiencies identified are based on the board’s established requirements.

4. (d) If the inspector identifies a deficiency that can be corrected prior to the conclusion of the inspection, the inspector shall:

   1. (1) Allow the applicant to correct the deficiency; and
   2. (2) Note the deficiency and the correction on the inspection checklist.
5. (e) The inspector shall conduct a wrap-up meeting as specified in Plc 403.06 prior to leaving the premises, provided that if the applicant refuses to participate in the wrap-up meeting, the inspector shall note the refusal on the inspection checklist.

Source. #14031, eff 8-15-24