1. (a) The manufacturer shall submit the appropriate application form listed below. When completing the application form for pre-certification purposes, the manufacturer shall indicate “pre-certification” in lieu of site specific information.
2. (b) For a rope tow, a manufacturer shall request pre-certification by submitting a completed form Pas 1 “Application for New Construction, Alteration in Length, Relocation, or Modification and Registration of Fiber Rope Tow or Wire Rope Tow”, as revised 1/2022.
3. (c) For a conveyor or carousel, a manufacturer shall request pre-certification by submitting a completed form Pas 2 “Application for New Construction, Alteration in Length, Relocation, or Modification and Registration of Conveyor or Carousel”, as revised 1/2022.
4. (d) For pre-certification of tows, carousels, and conveyors, the design shall be suitable for installation at any location without modification of any structures, electrical system, mechanical system or hydraulic system.
5. (e) Installation procedures shall be the same for all sites except for the length or number of carriers that might vary at different locations.

Source. #2297, eff 2-7-83; ss by #2704, eff 5-9-84, EXPIRED 5-9-90 (formerly Saf-S 1005.01) New. #4862, eff 7-10-90; amd by #6020, eff 4-14-95; ss by #6284, eff 7-10-96; ss by #7800, eff 12-11-02, EXPIRED: 12-11-10 New. #10072, eff 1-11-12; ss by #12989, eff 2-5-20; ss by #13429-B, eff 8-6-22 (see Revision Note #2 at chapter heading for Pass 300)