1. (a) Pursuant to RSA 205-D:17, in order to keep record of and verify the proper installation of manufactured homes, no manufactured house shall be installed in this state until the manufacturer or licensed installer, has obtained a warranty seal from the board through the office of professional licensure and certification (OPLC) and attached the seal to the manufactured house.

2. (b) The warranty seal shall bear the following information:

   1. (1) Type of manufactured house installed;
   2. (2) New Hampshire state seal;
   3. (3) Manufacturer’s name, address, and telephone number;
   4. (4) Date the house was manufactured and unit serial number;
   5. (5) Name and license number of the installer;
   6. (6) Address of instillation;
   7. (7) Date of installation;
   8. (8) Whether the unit is new or relocated;
   9. (9) Signature of the licensee responsible for the installation;
   10. (10) Date the inspection was performed;
   11. (11) Name and title of the inspector; and
   12. (12) Signature of the inspector.

3. (c) The warranty seal shall be distributed as follows:

   1. (1) The top page white copy is to be sent to the OPLC;
   2. (2) The canary-colored copy is to be retained by the installer; and
   3. (3) The third page white hard copy is attached to the manufactured home’s electrical box.

Source. #14194, eff 3-29-25 (formerly Inst 401.01)