1. (a) Pursuant to RSA 205-D:17, in order to keep record of and verify the proper installation of manufactured homes, no manufactured house shall be installed in this state until the manufacturer or licensed installer, has obtained a warranty seal from the board and attached the seal to the manufactured house.

2. (b) The warranty seal shall bear the following information:

   1. (1) Type of manufactured house installed;
   2. (2) State seal;
   3. (3) Manufacturer’s name, address, and telephone number;
   4. (4) Date the house was manufactured and unit serial number;
   5. (5) Name and license number of the installer;
   6. (6) Address and telephone number of installer;
   7. (7) Date of installation;
   8. (b) The warranty seal shall bear the following information:
   9. (8) Whether the unit is new or relocated;
   10. (9) Address of installation;
   11. (10) Signature of the licensee that is responsible for the installation;
   12. (11) Date the inspection was performed;
   13. (12) Name and title of the inspector; and
   14. (13) Signature of the inspector.

Source. #8494, eff 12-24-05; ss by #10115, eff 4-14-12; amd by #10337, eff 5-15-13