The applicant shall include the following in the report and plan required by Env-Wt 803.01:

1. (a) Existing and proposed channel forms, including both cross section and profile;
2. (b) Channel width and length of reach;
3. (c) Sediment transport model and the reference reach;
4. (d) Construction procedures, sequence, and timing;
5. (e) A planting proposal, with preference given to native plants and natural communities as required in Env-Wt 805.03(c);
6. (f) Information on the floodplain, including the level of connectivity between the stream and the floodplain, the permanence of coarse woody material in the floodplain, and the width of the floodplain;
7. (g) Erosion control specifications to prevent sediment from entering adjacent, undisturbed wetlands or surface waters;
8. (h) If any invasive plant species are within 100 feet of each stream bank, identification of the type and location of the species and an invasive species control plan;
9. (i) Photographs of the channel, banks, and side slopes; and
10. (j) A list of activities that will be allowed and not allowed within the mitigation area.

Source. #11000, eff 2-1-16; ss by #12808, eff 12-15-19 (See Revision Notes #1 and #2 at chapter heading for Env-Wt 800)