1. (a) The applicant shall submit design plans for the project in both plan and elevational views that clearly depict and identify all required elements, as described in Env-Wt 311 and (b) and (c), below.

2. (b) The plan view shall depict the following:

   1. (1) The engineering scale used, which shall be no larger than one inch equals 50 feet;
   2. (2) The location of tidal datum lines depicted as a line with the associated elevation noted, based on NAVD 88, derived from https://tidesandcurrents.noaa.gov/datum_options.html, as described in Env-Wt 603.08;
   3. (3) An imaginary extension of property boundary lines into the waterbody and a 20-foot setback from those property line extensions;
   4. (4) The location of all special aquatic sites at or within 100 feet of the subject property;
   5. (5) Existing bank contours;

   6. (6) The name and license number, if applicable, of each individual responsible for the plan, including:

      1. a. The agent for tidal docking structures who determined elevations represented on plans; and
      2. b. The certified wetland scientist or qualified coastal professional who completed the CFA report and located the identified resources on the plan; and
   7. (7) The location and dimensions of all existing and proposed structures and landscape features on the property.

3. (c) The elevational view shall depict the following:

   1. (1) The nature and slope of the shoreline;
   2. (2) The location and dimensions of all proposed structures, including permanent piers, pilings, float stop structures, ramps, floats, and dolphins; and
   3. (3) Water depths depicted as a line with associated elevation at highest observable tide, mean high tide, and mean low tide, and the date and tide height when the depths were measured.

Source. #12806, eff 12-15-19