The project-specific information required by Env-Wt 310.01(c)(1) or Env-Wt 311.03(b)(11), as applicable, for a C/M project shall be as follows:

1. (a) A description of the scope of the project, the size of the impacts to aquatic resources, and the purpose of the project;

2. (b) An accurate drawing with existing and proposed structure dimensions clearly annotated to:

   1. (1) Document existing site conditions;
   2. (2) Detail the precise location of the project and show the impact of the proposed activity on jurisdictional areas;
   3. (3) Show existing and proposed contours at 2-foot intervals;
   4. (4) Show existing and proposed structure invert elevations on the plans; and
   5. (5) Use a scale based on standard measures of whole units, such as an engineering rule of one to 10, provided that if plans are not printed at full scale, a secondary scale shall be noted on the plans that identifies the half scale unit of measurement;
3. (c) All easements and right-of-way acquisition area outlines in relation to the project;
4. (d) The name of the professional engineer who developed the plans, whether an employee of the applicant or at a consulting firm; and

5. (e) An erosion control plan that shows:

   1. (1) Existing and proposed contours at 2-foot intervals, with existing contours shown with a lighter line weight and proposed contours shown with a heavier line weight such as a bold font; and
   2. (2) The outermost limit of all work areas, including temporary phasing work, with perimeter controls.

Source. #12805, eff 12-15-19