To apply for a sludge quality certification, the generator shall provide 2 copies of the following to the department:

1. (a) The name and address of the facility, such as a wastewater treatment plant or other facility, that has generated or will generate the sludge;
2. (b) The name, title, and telephone number of the operator of the facility;
3. (c) If the generator is a POTW, a list and brief description of all industrial permit holders and each permit holder’s local limits;
4. (d) If the generator is an industrial wastewater treatment facility, the common chemical name of all chemicals being discharged to the treatment facility;
5. (e) The quantity of sludge, in dry tons, generated annually by the generating facility for the previous 2 calendar years;
6. (f) If the sludge is not generated in New Hampshire, certification that the sludge meets the chemical standards for land application in the state of origin as required by RSA 485-A:5-d;
7. (g) If the sludge contains human waste, a description of the process to achieve class A or class B pathogen reduction requirements and vector attraction reduction requirements, including a citation to the applicable 40 CFR part 503 section; and

8. (h) A sludge quality report that includes the following:

   1. (1) A description of the generating facility and sludge treatment process;
   2. (2) A chronological summary of analytical data from the previous 3 years, if available, for each detected chemical, presented in tabular form and by category; and
   3. (3) The results of testing required by Env-Wq 809.05, including laboratory reports, presented categorically as in (2), above, and summarized in tabular form.

Source. (See Revision Note #1 and Revision Note #2 at chapter heading for Env-Wq 800) #10998, eff 1-1-16