A facility plan required under Env-Wq 807.01(c)(2) shall include the following at a scale appropriate to show all information contained on the plan clearly:

1. (a) A locus map that identifies the proposed facility location;
2. (b) The total available land area, in acres, and the specific acres to be used for facility operations, including proposed stockpile locations;
3. (c) Identification of access roads and access control measures, including perimeter fencing and buffer distances;

4. (d) Identification of the following within 500 feet of the proposed facility:

   1. (1) Roads;
   2. (2) Land use;
   3. (3) The approximate location of all dwellings, structures, and water supply wells;
   4. (4) Property lines with names and mailing addresses of each abutter;
   5. (5) The location of any 100-year flood plain as defined and delineated by the flood insurance rate maps published by the Federal Emergency Management Agency; and
   6. (6) The name and location of all surface waters, including their designated river classification under RSA 483, New Hampshire rivers management and protection program, if applicable;
5. (e) Identification of proposed measures to control surface runoff to or from the facility and stockpile locations, if applicable;
6. (f) All soil test pit and auger boring locations and the information required by Env-Wq 807.10(c);
7. (g) Identification of all easements or right-of-ways located on the property proposed for the facility;
8. (h) The scale of the plan;
9. (i) An arrow indicating which direction on the plan is north;
10. (j) The location of all poorly and very poorly drained soils; and
11. (k) If applicable, the location of the elements of the groundwater monitoring plan required by Env-Wq 808.02(b).

Source. (See Revision Note #1 and Revision Note #2 at chapter heading for Env-Wq 800) #10998, eff 1-1-16