A hauler who has been issued a permit pursuant to Env-Wq 805 shall maintain each container and vehicle used to transport sludge as follows:

1. (a) Each container and vehicle shall be maintained:

   1. (1) So as not to create unreasonable malodors or public health hazards; and
   2. (2) In compliance with all federal and state requirements applicable to sludge transportation;
2. (b) Each container transporting sludge from which liquid might be released during transport shall be watertight;
3. (c) The lettering required by Env-Wq 805.06(b) shall be maintained so as to retain the legibility required by 805.06(c); and

4. (d) For containers transporting liquid sludge:

   1. (1) All piping, valves, and rigid or flexible connections shall be accessible and capable of being cleaned;
   2. (2) All inlet and outlet connections shall be constructed and maintained such that no material will leak, spill, or run out of the container during transfer or transportation; and
   3. (3) All discharge outlets shall be designed to control the flow of discharge without spraying or flooding the receiving area.

Source. (See Revision Note #1 and Revision Note #2 at chapter heading for Env-Wq 800) #10998, eff 1-1-16