The municipality shall develop local limits as follows:
- (a) Local limits shall specifically meet the headworks loading limit and reflect the design and operational capabilities of the WWTP;
- (b) Specific numerical limits shall be required on constituents contained in waste if the inclusion of such limits is necessary to meet applicable federal and state law;
- (c) Local limits shall be established on a mass basis to allow indirect dischargers to reduce water use; and
- (d) Local limits shall be reevaluated and revised as necessary no less than every 5 years from adoption.
Source. (See Revision Note at part heading for Env-Wq 305) #10381, eff 8-1-13; ss by #13241, eff 7-24-21