In addition to verifying the information described in Env-Wq 2102.17(c), the water user shall provide the information identified below to the department:

1. (a) The monthly water use total, as required by Env-Wq 2102.10(a)(1), for each registered source and destination, including the monthly volume(s) of water transferred to or from another facility;
2. (b) The monthly 24-hour maximum volume, as specified in Env-Wq 2102.10(a)(2), for each registered source and destination;
3. (c) The units of measurement;
4. (d) The method of measurement;
5. (e) If water usage is determined based on power production, the amount of power produced per month;
6. (f) If the source is used for snowmaking, whether the reported monthly totals include the amount of drainback, and the percent of monthly withdrawal that is returned as drainback;
7. (g) If water usage is determined based on a unit water use rate, the water user’s process for determining the unit water use rate;
8. (h) Information demonstrating compliance Env-Wq 2102.12(g) relative to open channel measurements, if applicable; and

9. (i) Any changes in registration information or water use that have occurred since the previous report, including but not limited to:

   1. (1) The addition of a new source or relocation or abandonment of an existing source;
   2. (2) The addition of a new destination or relocation or abandonment of an existing destination;
   3. (3) A facility expansion, modification, or relocation;
   4. (4) A change in method of measurement;
   5. (5) Problems with measurement equipment; and
   6. (6) An explanation of the conditions that resulted in the changes noted under (1) through (5), above.

Source. #9279, eff 9-24-08; ss by #12135, eff 3-21-17 (from Env-Wq 2102.17)