The facility plan required under Env-Wq 1609.01(c)(2) shall:

1. (a) Be at a scale appropriate to show all information contained on the plan clearly; and

2. (b) Include the following:

   1. (1) A locus map which identifies the proposed facility location and details the proposed route of access to and onto the facility;
   2. (2) The total available land area, in acres, and the specific acres to be used for facility operations, including proposed stockpile, holding or storage tank locations;
   3. (3) All access roads and access control measures, including perimeter fencing and setback zones;
   4. (4) All roads, property lines, structures whether on or off the property, and any easements or rights-of-way which exist on the property;
   5. (5) All proposed measures to control surface runoff to or from the facility, and stockpile and storage tank locations, if applicable;
   6. (6) A description of all surrounding land use within 1000 feet of the footprint of the facility;
   7. (7) All soil test pit and auger boring locations;
   8. (8) The approximate location of and distance to all dwellings, structures, and water supply wells on the property and within 600 feet of the footprint of the facility;
   9. (9) The names, tax map, lot numbers, and mailing addresses of all abutters;
   10. (10) The name and location of all surface waters within ¼ mile of the facility, including their designated river classification, under RSA 483, New Hampshire rivers management and protection program and limits of designated river protective corridor, if applicable;
   11. (11) The graphic and numerical scale of the plan;
   12. (12) An arrow indicating which direction on the plan is north;
   13. (13) The location of all poorly and very poorly drained soils; and
   14. (14) If applicable, the location of the groundwater discharge or management zone as described in Env-Wq 1612.02.

Source. (See Revision Note #1 and Revision Note #2 at chapter heading for Env-Wq 1600) #13944, eff 4-27-24