The site plan required under Env-Wq 1608.01(c)(1) shall be:
- (a) Based upon a municipal tax map, a surveyed plan, aerial photograph map, or other scaled drawing which identifies the proposed site location at a scale appropriate to delineate the information clearly; and
(b) Marked to show:
- (1) A locus map which identifies the proposed site location at a scale appropriate to delineate the information clearly;
- (2) The total land area, in acres, to be used for land application;
- (3) The boundary lines and land area of each field, in acres, identified by unique field designations;
- (4) All access roads, access control measures, and setback distances;
- (5) All proposed stockpiling and septage holding tank locations, if applicable;
- (6) All easements or rights-of-way which exist on the property;
- (7) All proposed measures to control surface water runoff to or from the site and stockpiling locations and comply with Env-Wq 1608.11, if applicable;
- (8) Surrounding land use, roads, and property lines within 500 feet of the site;
- (9) All soil test pit and auger boring locations;
- (10) The approximate location of and distance to all dwellings and structures and water supply wells, whether on or off the site, within 600 feet of the site application footprint;
- (11) The names, tax map, lot numbers, and mailing addresses of all abutters;
- (12) The name and location of all surface waters within ¼-mile of the site, including the designated river classification and the protected river corridor boundary under RSA 483, New Hampshire rivers management and protection program, if applicable;
- (13) The graphic and numerical scale of the plan;
- (14) An arrow indicating which direction on the plan is north; and
- (15) The location of all poorly and very poorly drained soils on the site as part of the site-specific soil map or survey required in Env-Wq 1608.01(c)(3).
Source. (See Revision Note #1 and Revision Note #2 at chapter heading for Env-Wq 1600) #13944, eff 4-27-24