(a) If the well is not installed in the location or area designated on the plan associated with the construction approval pursuant to Env-Wq 1004.07(a), then:
- (1) The water well contractor shall comply with RSA 485-A:30-b, I(g); and
- (2) Setbacks to all ISDS components shall be maximized to the greatest extent possible.
- (b) If, prior to the installation of the ISDS, the well is installed in a location or area other than as designated on the plan associated with the construction approval pursuant to Env-Wq 1004.07(a) and the actual location reduces lot loading below the approved design flow, then the applicant shall submit a request to amend the approval for construction for a design flow commensurate with lot loading.
- (c) If, subsequent to the installation of the ISDS, the well is installed in a location or area other than as designated on the plan associated with the construction approval pursuant to Env-Wq 1004.07(a) and the actual location reduces lot loading below the approved design flow, the lot loading for a replacement ISDS shall be in accordance with Env-Wq 1008.02.
(d) If the construction approval contains a condition that the well location noted on the approved plan is a critical well location, as defined in We 101.11, and the well cannot be installed as designated on the approved plan, then:
- (1) Subsections (a) through (c), above, shall not apply;
- (2) The owner shall be required to obtain an amended plan or new approval for construction with the assistance of a permitted designer for a design that shows the well at a location where it can be installed and a design flow commensurate with the lot loading available for the lot with the well at that location; and
- (3) The ISDS shall not be installed prior to installation of the well.
- (e) If an application for an ISDS cannot be approved unless a new well is installed and an existing well is no longer used, the approval for construction shall be conditioned upon the installation of the new well.
Source. (See Revision Notes #1 and #2 at chapter heading for Env-Wq 1000) #11184, eff 10-1-16; ss by #14486, eff 2-1-26, EXPIRES: 2-1-36 (formerly Env-Wq 1004.14)