- (a) The final plans for any subdivision of land and for any ISDS submitted for approval on paper shall meet the format requirements specified in (b) through (f), below.
- (b) All margins shall be at least one inch.
- (c) Subdivision plans shall have a scale of not more than 50 feet to one inch, unless the plan will not fit on a 28 inch by 40 inch sheet of paper, in which case a scale of one inch to 100 feet or one inch to 200 feet shall be used.
- (d) For ISDS plans, the lot and system shall be shown on a scale of not more than 20 feet to one inch, and a minimum of 10 feet to one inch for lots of less than 0.25 acres, except that if the lot cannot be shown on a 1:20 scale, it shall be shown on a larger scale on a separate sheet.
- (e) Sheet sizes shall be 22 inches x 34 inches, 24 inches x 36 inches, or 28 inches x 40 inches with separate sheets numbered and showing relationship to each other.
- (f) All paper plans submitted shall be folded to approximately 8-1/2 inches by 11 inches.
- (g) For plans submitted electronically, the format shall be as specified in the user agreement entered into by the registered user.
Source. (See Revision Notes #1 and #2 at chapter heading for Env-Wq 1000) #11184, eff 10-1-16; ss by #14486, eff 2-1-26, EXPIRES: 2-1-36