The following standards from the Petroleum Equipment Institute (PEI), P.O. Box 2380, Tulsa, OK 74101-2380, (918) 494-9696, http://pei.org, which are available as noted in Appendix B, shall apply if and as applicable:
- (a) RP 100, “Recommended Practices for Installation of Underground Liquid Storage Systems,” 2017 edition (PEI RP 100);
- (b) RP 300, “Recommended Practices for Installation and Testing of Vapor-Recovery Systems at Vehicle-Fueling Sites,” 2009 edition (PEI RP 300);
- (c) RP 500, Recommended Practices for Inspection and Maintenance of Motor Fuel Dispensing Equipment, 2011 (PEI RP 500);
- (d) RP 700, “Recommended Practices for Design and Maintenance of Fluid Distribution Systems at Vehicle maintenance Facilities,” 2014 edition (PEI RP 700);
- (e) RP 800, “Recommended Practices for Installation of Bulk Storage Plants,” 2008 edition (PEI RP 800);
- (f) RP 900, “Recommended Practices for Inspection and Maintenance of UST Systems,” 2017 edition (PEI RP 900);
- (g) RP 1000, “Recommended Practices for the Installation of Marina Fueling Systems”, 2014 edition (PEI RP 1000);
- (h) RP 1200, “Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities”, 2012 edition (PEI RP 1200);
- (i) RP 1300, “Recommended Practices for the Design, Installation, Service, Repair and Maintenance of Aviation Fueling Systems,” 2013 edition (PEI RP 1300); and
- (j) RP 1400, “Recommended Practices for the Design and Installation of Fueling Systems for Emergency Generators, Stationary Diesel Engines and Oil Burner Systems”, 2014 edition (PEI RP 1400).
Source. (See Revision Note #1 at chapter heading for Env-Or 400) #10393, eff 9-1-13; ss by #12643, eff 10-10-18 (See Revision Note #2 at chapter heading for Env-Or 400)