1. (a) The owner of any premises where a cross-connection exists shall apply for a cross-connection permit on the forms provided by the supplier of water if the premises are served by a PWS that is required to have a cross-connection program pursuant to Env-Dw 505.02(a).

2. (b) All permits shall be:

   1. (1) Issued by the supplier of water for a term not to exceed 5 years; and
   2. (2) Subject to revocation by the supplier of water.

3. (c) Each permit shall identify:

   1. (1) The owner’s name, email address, postal mailing address, and daytime telephone number;
   2. (2) The location of the backflow prevention device;
   3. (3) The name of the manufacturer of the backflow prevention device;
   4. (4) The size and model number of the backflow prevention device;
   5. (5) A description of contaminants that could be introduced through the cross-connection;
   6. (6) The frequency of inspections and testing of the backflow prevention device; and
   7. (7) The permit number.

4. (d) The holder of a cross-connection permit shall apply for the permit to be renewed every 5 years or:

   1. (1) Whenever a change has occurred in the existing degree of hazard classification; or
   2. (2) A change has been made in the type of backflow prevention device installed.
5. (e) Cross-connection permits shall be non-transferable.

Source. (See Revision Note at part heading for Env-Dw 505) #10615, eff 6-1-14; ss by #14120, eff 11-23-24, EXPIRES: 11-23-34