The owner or operator of any stationary source, area source, or device with add-on VOC control equipment shall maintain records of the following information, as applicable:

1. (a) The air pollution control device identification number, type, model number, and manufacturer;
2. (b) Installation date;
3. (c) Process(es) or device(s) controlled;
4. (d) The type and location of the capture system, capture efficiency percentage, and method of determining capture efficiency;
5. (e) Information as to whether or not the control device is always in operation when the process(es) or device(s) are in operation;

6. (f) The destruction or removal efficiency of the add-on air pollution control equipment, including:

   1. (1) Destruction or removal efficiency, in percent;
   2. (2) Date tested;

   3. (3) The emission test results, if tested, including:

      1. a. The inlet VOC concentration in ppm;
      2. b. The outlet VOC concentration in ppm; and
      3. c. The method of determination of the concentrations in a. and b. above; and
   4. (4) The method of determining destruction or removal efficiency, if not tested;
7. (g) For thermal incinerators, the design combustion temperature in degrees F;

8. (h) For catalytic incinerators:

   1. (1) The design exhaust gas temperature in degrees F;
   2. (2) The design temperature rise across the catalyst bed in degrees F;
   3. (3) The anticipated frequency of catalyst change; and
   4. (4) Any actual catalyst changes;

9. (i) For a condenser:

   1. (1) The design inlet temperature of the cooling medium; and
   2. (2) The design exhaust gas temperature in degrees F; and

10. (j) For a carbon adsorber:

    1. (1) The design pressure drop across the adsorber; and
    2. (2) The VOC concentration at breakthrough.

Source. #10892, eff 7-18-15 (from Env-A 904.07); ss by #14374, eff 9-20-25, EXPIRES: 9-20-35 (formerly Env-A 904.08)