N.H. Code Admin. R. Env-A 805.03
Requirements for CE Testing
Effective May 1, 2019(See Revision Note at chapter heading for Env-A 800) #5505 eff 11-15-92, EXPIRED: 11-15-98 New. #6893, INTERIM, eff 11-26-98, EXPIRED: 3-26-99 New. #7788, eff 10-31-02; ss by #9802, eff 10-31-10; ss by #12762, eff 5-1-19Air Related Programs
- (a) Detailed requirements for CE testing shall be as specified in this section and in the Guidelines for Determining Capture Efficiency (GFDCE), Candace Sorrell, Source Characterization Group A (MD-19), Emission Monitoring and Analysis Division, Office of Air Quality Planning and Standards, U.S. Environmental Protection Agency, Research Triangle Park, NC 27711, January 9, 1995.
- (b) An owner or operator of a source that uses a control device in order to comply with Env-A 1200 shall perform CE testing whenever compliance stack testing is required to be performed in accordance with Env-A 804.
(c) An owner or operator required to perform CE tests shall:
- (1) Perform one of the CE test procedures specified in Env-A 805.04;
- (2) Use one of the alternative CE test procedures specified in Env-A 805.05; or
- (3) Use an alternative CE test procedure in accordance with Env-A 809.
Source. (See Revision Note at chapter heading for Env-A 800) #5505 eff 11-15-92, EXPIRED: 11-15-98 New. #6893, INTERIM, eff 11-26-98, EXPIRED: 3-26-99 New. #7788, eff 10-31-02; ss by #9802, eff 10-31-10; ss by #12762, eff 5-1-19