1. (a) The owner or operator shall ensure that any person involved in minor asbestos abatement shall be certified in accordance with Env-A 1815 and Env-A 1816.
2. (b) Any person involved in minor asbestos abatement shall be certified in accordance with Env-A 1815 and Env-A 1816, unless exempt under the provisions of Env-A 1815.02.

3. (c) Any person performing a minor asbestos abatement shall do the following:

   1. (1) Prevent the release of asbestos fibers into the ambient air; and

   2. (2) Implement the following, minimum work practices and engineering controls:

      1. a. Install barriers such as glovebags to assure that fibers released during abatement activities are contained within the work area;
      2. b. Use HEPA vacuum equipment and wet cleaning techniques to clean up the work area following abatement until no visible residue is observed; and
      3. c. Follow the removal, disposal, and waste shipment requirements specified in Env-A 1812.01 through 1812.03.

Source. (See Revision Note #1, Revision Note #2, and Revision Note #3 at chapter heading for Env-A 1800) #14104, eff 11-1-24, EXPIRES: 11-1-34