1. (a) Pursuant to 40 CFR 61.145(c)(7)(iii), the asbestos abatement entity shall record the temperature at the beginning, middle, and end of each workday for any periods when wetting operations are suspended pursuant to Env-A 1812.01(g).

2. (b) After asbestos abatement is complete, each asbestos abatement entity for a facility where major or minor asbestos abatement has occurred shall record and maintain the following information, as applicable, in electronic or paper format, for each asbestos abatement:

   1. (1) The name, title, and address of each asbestos abatement supervisor and worker who participated in the asbestos abatement;
   2. (2) The address of the asbestos abatement;
   3. (3) The work plan for the asbestos abatement;
   4. (4) All notifications and revisions submitted to the department pursuant to Env-A 1806;
   5. (5) Waste shipment records and disposal site slips for all RACM taken from the asbestos abatement site;
   6. (6) The estimated amount of RACM involved in the asbestos abatement;
   7. (7) The scheduled and actual starting and completion dates and, if an actual date differs from the date originally scheduled, a statement of reasons for the difference(s);
   8. (8) Documentation of compliance with all applicable requirements of this chapter;
   9. (9) Copies of all asbestos-related correspondence with the department and other state and federal agencies concerning the project, including but not limited to building or demolition permits, notices of violation, or other documents relating to permits;
   10. (10) The name and address of the asbestos disposal facility to which the RACM was taken;

   11. (11) Information regarding any air sampling, including:

       1. a. Methodology and results of clearance testing pursuant to Env-A 1808.06, conducted during the abatement process;
       2. b. Fiber concentration methodology and results pursuant to Env-A 1808.04(e);
       3. c. The name and address of any consultant(s) hired to perform such sampling; and
       4. d. The name and address of any asbestos analytical service(s) employed to analyze such samples, pursuant to Env-A 1813;
   12. (12) Descriptions of worksite accidents and asbestos exposure;
   13. (13) A copy of the report summarizing the findings of the inspection, as required by Env-A 1804.01(c)(1); and
   14. (14) Documentation regarding any alternative procedure used and approval received, pursuant to Env-A 1811.02.

3. (c) After asbestos abatement is complete, each owner or operator of a facility where major or minor asbestos abatement has occurred shall record and maintain the following information, as applicable, in electronic or paper format, for each asbestos abatement:

   1. (1) A copy of all notifications and revisions submitted to the department pursuant to Env-A 1806;
   2. (2) A copy of the waste shipment records and disposal site slips for all RACM taken from the asbestos abatement site;
   3. (3) A copy of the clearance air sampling and clearance determination; and
   4. (4) A copy of the report summarizing the inspection findings required by Env-A 1804.01(c)(1).
4. (d) The requirements of (b) and (c), above, shall not apply to SSSD activities.

Source. (See Revision Note #1, Revision Note #2, and Revision Note #3 at chapter heading for Env-A 1800) #14104, eff 11-1-24, EXPIRES: 11-1-34