1. (a) Before completing asbestos abatement or disposing of ACM, the homeowner shall package ACM in accordance with Env-Sw 901.06, and as follows:

   1. (1) For all loose ACM, take the following actions to prevent the release of fibers:

      1. a. Adequately wet the ACM with amended water;
      2. b. Place the ACM into leak-tight containers or double impermeable bags of at least 6 mil thickness each; and
      3. c. Seal the containers or bags with tape, as applicable;
   2. (2) Wrap large components or structural members that were removed intact in 2 leak-tight layers of 6 mil sheeting and seal the sheeting with tape; and
   3. (3) Line the containers, into which bulk unwrapped asbestos waste is placed, with at least 20 mil of sheeting.

2. (b) The homeowner shall label ACM, in accordance with Env-Sw 901.06, and as follows:

   1. (1) Label the containers or wrapped materials using warning labels, as follows:

      1. a. Printed in letters of sufficient size and contrast so as to be readily visible and legible; and
      2. b. As specified in 29 CFR 1910.1001(j)(5) or 1926.1101(k)(8); and
   2. (2) For asbestos-containing waste material to be delivered to a permitted disposal facility, label containers or wrapped materials with the name of the homeowner and the location at which the waste was generated.

Source. (See Revision Note #1, Revision Note #2, and Revision Note #3 at chapter heading for Env-A 1800) #14104, eff 11-1-24, EXPIRES: 11-1-34