A source that is subject to Env-A 1220.02 shall use one of the following application methods:
- (a) Electrostatic spray;
- (b) HVLP spray;
- (c) Flow coat, roll coat, or hand application, including non-spray application methods similar to hand or mechanically powered caulking gun, brush, or direct hand application;
- (d) Dip coat, including electrodeposition;
- (e) Airless spray;
- (f) Air-assisted airless spray; or
- (g) Other adhesive application methods capable of achieving a transfer efficiency equivalent to or better than that achieved by HVLP spraying.
Source. (See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11; ss by #12899, eff 10-17-19