As an alternative to the applicable emission rate limits, technological controls, operation and maintenance controls, and work practice standards specified in Env-A 1213.02 through Env-A 1213.09, as applicable, wood furniture, wood burial casket, or gunstock coating and finishing operations meeting the applicability criteria of Env-A 1213.01 may implement one or more of the following methods:

1. (a) Install and use an add-on control system that results in emissions to the atmosphere that do not numerically exceed the applicable VOC content limits, validated by the procedure described in Env-A 1213.11;

2. (b) Meet either a coatings-based or solids-based modified emission rate or VOC content limit as approved by the director and EPA in accordance with the RACT order provisions in Env-A 1205.03 through Env-A 1205.06 in the event that the source owner or operator demonstrates that, because of technological or economic reasons, the source owner or operator cannot meet one or more of the following:

   1. (1) The applicable specified emission rate limit(s) in Env-A 1213.02 or Env-A 1213.03; or
   2. (2) The applicable VOC content limit prescribed in Env-A 1213.04(a); or
3. (c) Comply with one or more modified control techniques approved by the director and EPA in accordance with the RACT order provisions in Env-A 1205.03 and Env-A 1205.06 in the event that the source owner or operator demonstrates that the applicable specified control technique in Env-A 1213.04(b), Env-A 1213.05, Env-A 1213.06, Env-A 1213.07, Env-A 1213.08, or Env-A 1213.09 cannot be met because of technological or economic reasons.

Source. (See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11; ss by #12899, eff 10-17-19