N.H. Code Admin. R. Env-A 101.240
“Sawing”, #6482-A, effective 4-1-97
The definitions readopted with amendments and renumbered from Env-A 100 as rules in Env-A 1802.01 include the following terms and phrases. The prior document containing the definitions is identified in Document #8304 as Document #6482-A, effective 4-1-97:
“Aggressive sampling”
“Analytical service”
“Asbestos”
“Asbestos abatement”
“Asbestos-containing material”
“Category I nonfriable ACM”
“Category II nonfriable ACM”
“Clean room”
“Emergency Asbestos Project”
“Encapsulant”
“Encapsulation”
“Equipment room”
“Glovebag”
“HEPA filtration”
“Major asbestos abatement project—Class N”
“Major asbestos abatement project—Class S demolition”
“Major asbestos abatement project—Class S renovation”
“Minor asbestos abatement project”
“Regulated Asbestos-Containing Material”
“Removal”
“Renovation”
“Sheets” or “sheeting”
“Shower room”
“Tape”
REVISION NOTE #3:
Document #9839, effective 12-21-10, adopted 2 definitions in Env-A 100 and readopted with amendments and renumbered Env-A 101.113, defining “major source,” as Env-A 115. These actions necessitated extensive renumbering of most of the remaining definitions in Env-A 100, as indicated in the source notes referencing Document #9839 below.
The definitions adopted by Document #9839 are: