N.D. Admin. Code § 33.1-24-01-05
33.1-24-01-05. Incorporation by reference.
1. When used in this article, the publications listed in this section are incorporated by reference. Copies may be inspected at the library, United States environmental protection agency, 1200 Pennsylvania Avenue NW (3403T), Washington, D.C. 20460, libraryhq@epa.gov; or at the national archives and records administration. For information on the availability of this material at the national archives and records administration, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
2. The following materials are available for purchase from the American society for testing and materials, 100 Barr Harbor Drive, P. O. Box C700, West Conshohocken, Pennsylvania 19428-2959:
a. ASTM D93-79 or D93-80, "Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester".
b. ASTM D1946-82, "Standard Method for Analysis of Reformed Gas by Gas Chromatography".
c. ASTM D2267-88, "Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography".
d. ASTM D2382-83, "Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)".
e. ASTM D2879-92, "Standard Test Method for Vapor Pressure -Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope".
f. ASTM D3278-78, "Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester".
g. ASTM E168-88, "Standard Practices for General Techniques of Infrared Quantitative Analysis".
h. ASTM E169-87, "Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis".
i. ASTM E260-85, "Standard Practice for Packed Column Gas Chromatography".
j. ASTM E926-88, "Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals", Test Method C - Bomb, Acid Digestion Method.
k. ASTM D6450-99, "Standard Test Method for Flash Point by Continuously Closed Cup Tester".
3. The following materials are available for purchase from the national technical information service, 5285 Port Royal Road, Springfield, Virginia 22161, 703-605-6060 or 800-553-6847; or for purchase from the superintendent of documents, United States government printing office, Washington, D.C. 20402, 202-512-1800:
a. "APTI Course 415: Control of Gaseous Emissions", environmental protection agency publication EPA-450/2-81-005, December 1981.
b. Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry:
(1) Revision A, EPA-821-R-98-002, February 1999.
(2) Revision B, EPA-821-R-10-001, February 2010.
c. The following methods as published in the test methods compendium known as "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", environmental protection agency publication SW-846, third edition. A suffix of "A" in the method number indicates revision one (the method has been revised once). A suffix of "B" in the method number indicates revision two (the method has been revised twice). A suffix of "C" in the method number indicates revision three (the method has been revised three times). A suffix of "D" in the method number indicates revision four (the method has been revised four times):
(1) Method 0010, dated September 1986 and in the Basic Manual.
(2) Method 0020, dated September 1986 and in the Basic Manual.
(3) Method 0030, dated September 1986 and in the Basic Manual.
(4) Method 1320, dated September 1986 and in the Basic Manual.
(5) Method 1311, dated September 1992 and in Update I.
(6) Method 1330A, dated September 1992 and in Update I.
(7) Method 1312, dated September 1994 and in Update III.
(8) Method 0011, dated December 1996 and in Update III.
(9) Method 0023A, dated December 1996 and in Update III.
(10) Method 0031, dated December 1996 and in Update III.
(11) Method 0040, dated December 1996 and in Update III.
(12) Method 0050, dated December 1996 and in Update III.
(13) Method 0051, dated December 1996 and in Update III.
(14) Method 0060, dated December 1996 and in Update III.
(15) Method 0061, dated December 1996 and in Update III.
(16) Method 9071B, dated April 1998 and in Update IIIA.
(17) Method 1010A, dated November 2004 and in Update IIIB.
(18) Method 1020B, dated November 2004 and in Update IIIB.
(19) Method 1110A, dated November 2004 and in Update IIIB.
(20) Method 1310B, dated November 2004 and in Update IIIB.
(21) Method 9010C, dated November 2004 and in Update IIIB.
(22) Method 9012B, dated November 2004 and in Update IIIB.
History: Effective January 1, 2019; amended effective July 1, 2020; July 1, 2021.