1. An owner or operator shall assemble information about the site and the nature of the release, including information gained while confirming the release or completing the initial abatement measures in sections 33.1-13-01-11 and 33.1-13-01-12. The information must include the following: a. Data on the nature of and estimated quantity of release; b. Data from available sources and site investigations, concerning the following factors: surrounding populations, water quality, use and approximate locations of wells potentially affected by the release, subsurface soil conditions, locations of subsurface sewers, climatological conditions, and land use; c. Results of the site check required under subsection 2 of section 33.1-13-01-12; d. Results of any investigations required under this chapter; e. The name of the persons responsible for implementing the free product removal measures; f. The estimated quantity, type, and thickness of free product observed or measured in wells, boreholes, and excavations;

g. The type of free product recovery system used; h. Whether any discharge will take place onsite or offsite during the recovery operation and where this discharge will be located; i. The type of treatment applied to, and the effluent quality expected from, any discharge; j. The steps that have been or are being taken to obtain necessary permits for any discharge; and k. The intended disposition of the recovered free product.

2. Within forty-five days of release confirmation, an owner or operator shall submit the information required under this section to the department in a format required by the department.