- (a) All plastic or fiberglass riser, effluent filter, and pipe penetration boot approvals shall expire on December 31 of each year. Plastic or fiberglass riser, effluent filter, and pipe penetration boot manufacturers who wish to continue product approval shall submit annually a proprietary product renewal form provided by the Department no later than November 30 of each year.
(b) The approval renewal form shall include the following elements:
- (1) manufacturer's name, mailing address, phone and fax numbers, email address, , and manufacturer's point of contact;
- (2) model number(s) approved; and
- (3) a notarized statement that the product has not changed from the previous year without prior approval from the Department.
- (c) The Department shall notify the manufacturer of the pending plastic or fiberglass riser, effluent filter, and pipe penetration boot Approval expiration in writing no later than September 30 of each year. The notification shall include information on how to request plastic or fiberglass riser, effluent filter, and pipe penetration boot renewal.
- (d) The plastic or fiberglass riser, effluent filter, and pipe penetration boot approval shall be deemed renewed upon receipt of a renewal form that contains all of the elements set out in Paragraph (b) of this Rule.
History Note: Authority G.S. 130A-335(e) and (f); 130A-343; S.L. 2024-49, s.4.46;
Eff. January 1, 2024;
Amended Eff. June 1, 2026.