1. (a) Except as provided for in Rule .1203 of this Section, CCPs shall not be distributed for use or used if the concentration of any pollutant during the performance of a Toxicity Characteristic Leaching Procedure of the CCPs exceeds the leachate concentration of concern for that pollutant as follows:

   Pollutant Leachate Concentration of Concern

   (milligrams per liter)

   Arsenic 5.0

   Barium 100.0

   Cadmium 1.0

   Chromium 5.0

   Lead 5.0

   Mercury 0.2

   Selenium 1.0

   Silver 5.0

2. (b) Except as provided for in Rule .1203 of this Section, CCPs shall not be distributed for use or used if the concentration of any pollutant in the CCPs exceeds the ceiling concentration for that pollutant on a dry weight basis as follows:

   Pollutant Ceiling Concentration

   (milligrams per kilogram)

   Arsenic 75

   Cadmium 85

   Copper 4,300

   Lead 840

   Mercury 57

   Molybdenum 75

   Nickel 420

   Selenium 100

   Zinc 7,500

3. (c) Except as provided for in Rule .1203 of this Section, CCPs shall not be distributed for use or used if the concentration of any pollutant in the CCPs exceeds the concentration for that pollutant on a dry weight basis as follows:

   Pollutant Monthly Average Concentration

   (milligrams per kilogram)

   Arsenic 41

   Cadmium 39

   Copper 1,500

   Lead 300

   Mercury 17

   Molybdenum 75

   Nickel 420

   Selenium 100

   Zinc 2,800

4. (d) CCPs may be distributed for use or used if the limits specified in Paragraphs (a), (b), or (c) of this Rule are not met if the following criteria are met:

   1. (1) the potential release of pollutants from the CCPs to the environment is minimized to the extent practicable; and
   2. (2) the applicant demonstrates that it will meet the applicable surface water and groundwater quality standards at the compliance boundary at the site of use.

History Note: Authority G.S. 143-215.1; 143-215.3(a);
Eff. September 1, 2006;
Readopted Eff. September 1, 2018.