Admin. R. Mont. 17.8.310
(2) When the process weight rate falls between two process weight rate values in the table, or exceeds 3,000 tons per hour, the maximum hourly allowable emissions of particulate matter must be calculated using the following equations:
(a) Maximum hourly allowable emissions of particulate matter, for process weight rates up to 30 tons per hour, must be calculated using the following equation:
E = 4.10 P 0.67
(b) Maximum hourly allowable emissions of particulate matter, for process weight rates in excess of 30 tons per hour, must be calculated using the following equation:
E = 55.0 P 0.11 - 40
Where E = rate of emission in pounds per hour and P = process weight rate in tons per hour.
(3) This rule does not apply to particulate matter emitted from:
(e) sources constructed after March 16, 1979, that have a specific particulate emission limitation contained in a Montana air quality permit obtained under ARM Title 17, chapter 8, subchapter 7, a court order, board order or department order, or a process-specific rule.
Maximum Hourly Allowable
Emissions of Particulate Matter
Process Weight Rate lb/hr
Tons/hr
0.05 0.551
0.10 0.877
0.20 1.40
0.30 1.83
0.40 2.22
0.50 2.58
0.75 3.38
1.00 4.10
1.25 4.76
1.50 5.38
1.75 5.96
2.00 6.52
2.50 7.58
3.00 8.56
3.50 9.49
4.00 10.40
4.50 11.20
5.00 12.00
6.00 13.60
8.00 16.50
9.00 17.90
10.00 19.20
15.00 25.20
20.00 30.50
25.00 35.40
30.00 40.00
35.00 41.30
40.00 42.50
45.00 43.60
50.00 44.60
60.00 46.30
70.00 47.80
80.00 49.00
100.00 51.20
500.00 69.00
1,000.00 77.60
3,000.00 92.70
Authorizing statute(s): 75-2-111, 75-2-203, MCA
Implementing statute(s): 75-2-203, MCA
History: Eff. 12/31/72; AMD, Eff. 7/5/74; AMD, Eff. 9/5/75; AMD, 1995 MAR p. 2413, Eff. 11/10/95; TRANS, from DHES, 1996 MAR p. 2285; AMD, 2002 MAR p. 3567, Eff. 12/27/02.